From time to time, Brooks Machinery is able to offer quality used precision machine tools and equipment to our customers. Stop by this area of our website for additions or sign up for our newsletter to be notified via email. For all used machine tools and equipment, you can count on Brooks premier service and support.
MAXIEM 1530 2009 model
Table Size: 151” x 69”
Cutting Area: 122” x 62”
Pump: 30 hp, 50000 psi (2005 model)
$90,000 FOB Kent, WA
Price includes 6 month warranty, installation, training, software upgrades for life, and unlimited seats of software. See below for complete factory inspection process for refurbished equipment.
MAXIEM JetMachining Centers are completely cleaned and prepared for resale.
Manufacturing evaluates the condition of each machine and replaces components as required.
- Disassemble the XY axes to clean and refurbish
- All debris is removed from the machine
- All surfaces are cleaned and scrubbed
- Tank is sandblasted and recoated
- Replacement of damaged or worn items are installed
- The traction drive is checked and cleaned
- All linear drives are tested and reviewed
- Control servo drive systems are tested
- All controllers are loaded with current MAXIEM Intelli-MAX ® Software
- Controllers are upgraded to current configuration
- All machines are retested for accuracy
- A Reinshaw Ballbar test is conducted
- A laser test is conducted to verify squareness on large machines
MAXIEM Direct Drive Pump
- The complete wet end assembly is cleaned and checked
- All worn or damaged parts are replaced
- Crank case is replaced if needed
OMAX 2626 2007 model
Table Size: 46” x 31”
Cutting Area: 26” x 26”
Pump: 30 hp, 50000 psi (2005 model)
Accessories: Tilt-a-Jet (taper compensating/minimizing head), and Solids Removal System (garnet removal from bottom of tank)
$119,000 FOB Kent, WA
Price includes 1 year warranty, installation, training, software upgrades for life, and unlimited seats of software. See below for complete factory inspection process for refurbished equipment.
OMAX JetMachining Centers are completely cleaned and prepared for resale.
Manufacturing evaluates the condition of each machine and replaces components as required.
- Disassemble the XY axes to clean and refurbish
- All debris is removed from the machine
- All surfaces are cleaned and scrubbed
- Tank is sandblasted and recoated
- Replacement of damaged or worn items are installed
- The ball screw is checked, cleaned, and greased
- All linear drives are tested and reviewed
- Control servo drive systems are tested
- Bellows are thoroughly inspected, repaired, or replaced
- All controllers are loaded with current OMAX Intelli-MAX ® Software
- Controllers are upgraded to current configuration
- All machines are retested for accuracy
- A Reinshaw Ballbar test is conducted
- A laser test is conducted to verify squareness on large machines
OMAX Direct Drive Pump
- The complete wet end assembly is cleaned and checked
- All worn or damaged parts are replaced
- Crank case is replaced if needed
OMAX 2652 2007 model
Table Size: 69” x 30”
Cutting Area: 52” x 26”
Pump: 30 hp, 50000 psi
Accessories: Tilt-a-Jet (taper compensating head), 600 lb abrasive hopper
$145,000 FOB Kent, WA
Price includes 1 year warranty, installation, training, software upgrades for life, and unlimited seats of software. See below for complete factory inspection process for refurbished equipment.
OMAX JetMachining Centers are completely cleaned and prepared for resale.
Manufacturing evaluates the condition of each machine and replaces components as required.
- Disassemble the XY axes to clean and refurbish
- All debris is removed from the machine
- All surfaces are cleaned and scrubbed
- Tank is sandblasted and recoated
- Replacement of damaged or worn items are installed
- The ball screw is checked, cleaned, and greased
- All linear drives are tested and reviewed
- Control servo drive systems are tested
- Bellows are thoroughly inspected, repaired, or replaced
- All controllers are loaded with current OMAX Intelli-MAX ® Software
- Controllers are upgraded to current configuration
- All machines are retested for accuracy
- A Reinshaw Ballbar test is conducted
- A laser test is conducted to verify squareness on large machines
OMAX Direct Drive Pump
- The complete wet end assembly is cleaned and checked
- All worn or damaged parts are replaced
- Crank case is replaced if needed
OMAX 80160 2006 model
Table Size: 174” x 89”
Cutting Area: 160” x 80”
Pump: 40 hp, 55000 psi
$179,000 FOB Kent, WA
Price includes 1 year warranty, installation, training, software upgrades for life, 600 lb abrasive hopper and unlimited seats of software. See below for complete factory inspection process for refurbished equipment.
OMAX JetMachining Centers are completely cleaned and prepared for resale.
Manufacturing evaluates the condition of each machine and replaces components as required.
- Disassemble the XY axes to clean and refurbish
- All debris is removed from the machine
- All surfaces are cleaned and scrubbed
- Tank is sandblasted and recoated
- Replacement of damaged or worn items are installed
- The ball screw is checked, cleaned, and greased
- All linear drives are tested and reviewed
- Control servo drive systems are tested
- Bellows are thoroughly inspected, repaired, or replaced
- All controllers are loaded with current OMAX Intelli-MAX ® Software
- Controllers are upgraded to current configuration
- All machines are retested for accuracy
- A Reinshaw Ballbar test is conducted
- A laser test is conducted to verify squareness on large machines
OMAX Direct Drive Pump
- The complete wet end assembly is cleaned and checked
- All worn or damaged parts are replaced
- Crank case is replaced if the pump has ran more than
OMAX 55100 2008 model
Table Size: 126” x 65”
Cutting Area: 100” x 55”
Pump: 40 hp, 55000 psi
$139,000 FOB Kent, WA
Price includes 1 year warranty, installation, training, software upgrades for life, and unlimited seats of software. See below for complete factory inspection process for refurbished equipment.
OMAX JetMachining Centers are completely cleaned and prepared for resale. Manufacturing evaluates the condition of each machine and replaces components as required.
- Disassemble the XY axes to clean and refurbish
- All debris is removed from the machine
- All surfaces are cleaned and scrubbed
- Tank is sandblasted and recoated
- Replacement of damaged or worn items are installed
- The ball screw is checked, cleaned, and greased
- All linear drives are tested and reviewed
- Control servo drive systems are tested
- Bellows are thoroughly inspected, repaired, or replaced
- All controllers are loaded with current OMAX Intelli-MAX ® Software
- Controllers are upgraded to current configuration
- All machines are retested for accuracy
- A Reinshaw Ballbar test is conducted
- A laser test is conducted to verify squareness on large machines
OMAX Direct Drive Pump
- The complete wet end assembly is cleaned and checked
- All worn or damaged parts are replaced
- Crank case is replaced if the pump has ran more than
OMAX 2652 2004 model
Table Size: 69” x 30”
Cutting Area: 52” x 26”
Pump: 30 hp, 50000 psi
Accessories: Tilt-a-Jet (taper compensating/minimizing head),
and Solids Removal System (garnet removal from bottom of tank)
$124,000 FOB Kent, WA
Price includes 1 year warranty, installation, training, software upgrades for life, and unlimited seats of software. See below for complete factory inspection process for refurbished equipment.
OMAX JetMachining Centers are completely cleaned and prepared for resale.
Manufacturing evaluates the condition of each machine and replaces components as required.
- Disassemble the XY axes to clean and refurbish
- All debris is removed from the machine
- All surfaces are cleaned and scrubbed
- Tank is sandblasted and recoated
- Replacement of damaged or worn items are installed
- The ball screw is checked, cleaned, and greased
- All linear drives are tested and reviewed
- Control servo drive systems are tested
- Bellows are thoroughly inspected, repaired, or replaced
- All controllers are loaded with current OMAX Intelli-MAX ® Software
- Controllers are upgraded to current configuration
- All machines are retested for accuracy
- A Reinshaw Ballbar test is conducted
- A laser test is conducted to verify squareness on large machines
OMAX Direct Drive Pump
- The complete wet end assembly is cleaned and checked
- All worn or damaged parts are replaced
- Crank case is replaced if the pump has ran more than
OMAX 2652 1995 model
Table Size: 69” x 30”
Cutting Area: 52” x 26”
Pump: 30 hp, 50000 psi
$85,000 FOB Kent, WA
Price includes 1 year warranty, installation, training, software upgrades for life,
and unlimited seats of software. See below for complete factory inspection process for refurbished equipment.
OMAX JetMachining Centers are completely cleaned and prepared for resale.
Manufacturing evaluates the condition of each machine and replaces components as required.
- Disassemble the XY axes to clean and refurbish
- All debris is removed from the machine
- All surfaces are cleaned and scrubbed
- Tank is sandblasted and recoated
- Replacement of damaged or worn items are installed
- The ball screw is checked, cleaned, and greased
- All linear drives are tested and reviewed
- Control servo drive systems are tested
- Bellows are thoroughly inspected, repaired, or replaced
- All controllers are loaded with current OMAX Intelli-MAX ® Software
- Controllers are upgraded to current configuration
- All machines are retested for accuracy
- A Reinshaw Ballbar test is conducted
- A laser test is conducted to verify squareness on large machines
OMAX Direct Drive Pump
- The complete wet end assembly is cleaned and checked
- All worn or damaged parts are replaced
- Crank case is replaced if the pump has ran more than
Year 2000 YCM Supermax FV56A
- Dual 22” x 16” tables
- 22” x 16” x 17” XYZ Travels
- 20 Station Double Arm ATC (CAT40)
- 10,000 RPM Spindle (15/10 HP)
- Spindle Chiller
- Rear Exit Chip Conveyor
- Fanuc 18M CNC
- High Pressure Coolant
- Rigid Tapping
- Helical/Circular Interpolation
Price $44,900.00 FOB CT
Availability: Immediate
Under power: Yes
Terms: 50% with order, balance due on shipment
Warranty: “as is” condition